UV glue

LOCTITE AA 3953 is a colorless to straw-colored, transparent, fluorescent, medium viscosity, UV-cured, acrylated urethane acrylic adhesive designed for use where a fast-curing, highly flexible adhesive is required. It is used for bonding plasticized PVC, TPEs and thermoset rubbers. It also maintains high adhesion to rigid substrates such as polycarbonate, ABS, acrylic, HDPE, PP, etc.

LOCTITE AA 3491 is a clear, low yellowing, medium viscosity light curing general purpose acrylic-containing instant adhesive for plastics, especially ceramics, glass and metals. Cures on demand, fast. The curing depth is 4 mm. Tack-free time is 15 seconds. The initial solid time is 12 seconds. Shore hardness: D 75 medium viscosity 1,100 mPa·s

LOCTITE 3705 is a bone-white to beige, translucent, UV-cure acrylic adhesive which is designed for high throughput assembly operations. Its thixotropic nature reduces migration of liquid product after application to substrate.

LOCTITE 3189UV is a green, transparent, medium viscosity, UV-cured modified acrylate acrylic adhesive. It only cures when exposed to UV light. It has excellent adhesion to glass and metals with typical applications including terminal pin bonding.

LOCTITE EA 3335 is a clear, UV epoxy liquid adhesive primarily used for bonding, coating and joining metal, plastic or glass substrates. This product uses a UV/cationic process for fast cure. Low shrinkage, when cured, exhibits good heat, water and chemical resistance. LOCTITE EA 3335 is suitable for applications requiring low outgassing.

LOCTITE ECCOBOND DS 3318LVT is specially designed and developed for the protection of COG-LCD modules, and it can be cured quickly even under the irradiation of very low energy UV light. This product has very excellent moisture barrier properties.

LOCTITE AA 319 is a 1-component acrylic-based adhesive that offers structural bonding solutions for materials such as glass, metal, ceramics and plastics. Typical applications include bonding of rear-view mirrors onto glass. Compensates for different thermal expansion of parts. To ensure a fast and reliable cure, activator mesh should be used.

LOCTITE AA 3052 is an amber, clear, UV-cured, modified methacrylate anaerobic adhesive that cures rapidly on PRIMER N-treated metal surfaces in the absence of air. Excess glue can also be cured to a solid by exposure to UV light. It can be used to bond glass, plastic, metal, ceramics, etc. inside motor housings, magnet assemblies, piezo buzzers, and many other applications.

Fluorescent, UV-cure, ethyl cyanoacrylate instant adhesive with photo-initiator. LOCTITE 4311 is a light yellow-green to dark blue-green, transparent, fluorescent, UV-cure, ethyl cyanoacrylate instant adhesive with photo-initiator. The UV-cure properties facilitate rapid curing of exposed surface areas thereby minimizing blooming and providing an alternative to solvent borne accelerators. It is suitable for use in the assembly of disposable medical devices.

LOCTITE DSP 190024 is primarily designed for bonding rigid and flexible PVC to polycarbonate where large gap filling capabilities (0.25mm) and a flexible joint are desired. Its flexibility enhances the load bearing and shock absorbing characteristics of the bond area. The product has shown excellent adhesion to a wide variety of substrates including glass, many plastics and most metals. The thixotropic nature of LOCTITE DSP 190024 reduces the migration of liquid product after application to the substrate.