Structural Glue 结构胶

3M™ Scotch-Weld™ Epoxy Adhesive 1469 is a one-part, thermosetting liquid adhesive that provides exceptionally high strength at temperatures from -70°F to 300°F (-57°C to 149°C). This white to cream colored adhesive can be applied by knife coating, trowel, roller coating, pump and high pressure injection methods.

3M™ Scotch-Weld™ Epoxy Adhesive 2214 Hi-Temp is designed to provide high strength, high temperature resistance and smooth bond lines. This aluminum-filled product is designed for use where higher strengths are required between 180°F to 350°F (82°C to 177°C), especially on steel.

3M™ Scotch-Weld™ Epoxy Adhesive 2290 is a solvent-based, low viscosity amber tinted thermosetting epoxy adhesive requiring heat cure. It is designed for metal to metal coating and subsequent bonding: for example, in motor lamination and wire winding.

3M™ Scotch-Weld™ Epoxy Adhesive 1386 is a one-part, thermosetting liquid adhesive that provides exceptionally high strength at service temperatures from -70°F to 250°F (-57ºC to 121ºC). This cream colored adhesive can be applied by knife coating, trowel, roller coating, pump and high pressure injection methods.

3M™ Scotch-Weld™ Metal Bonder Acrylic Adhesive DP8407NS is a gray structural adhesive with high overlap shear and peel strength with good impact resistance and durability. This adhesive was designed to bond permanently to bare metals with minimal surface preparation, but also bonds well to wide variety of other materials, including most plastics.

3M™ SA9820 Structural Adhesive is a two-component epoxy adhesive that enhances the design flexibility for automotive OEMs in structural and chassis components. It is highly suitable for bonding carbon composites and can cure at low temperatures, providing mechanical performance comparable to 1K adhesives even on oily metal surfaces. The assembled parts, once induction-heated, can be stored for up to two months before full curing.

3M™ Scotch-Weld™ Epoxy Adhesive 2216 is a flexible, two-part epoxy adhesive that cures at room temperature. It provides a high strength bond with both high shear and peel strength while remaining highly flexible, making it ideal for applications where vibration and thermal expansion and contraction are common. It also withstands very cold temperatures without becoming brittle.

3M™ Scotch-Weld™ DP8005 Plastic Structural Adhesive is a two-component acrylic-based adhesive specifically formulated for bonding a variety of low surface energy plastics, including various grades of polypropylene, polyethylene, and thermoplastic elastomers (TPE), without the need for special surface preparation.

3M™ Scotch-Weld™ Epoxy Adhesive 420NS Black is a non-sag, two-component epoxy adhesive designed for durable and high-stress applications. This epoxy adhesive absorbs impact, resists vibration and fatigue, and provides high shear and peel strength. 3M™ Scotch-Weld™ Epoxy Adhesive 420NS offers durable and reliable adhesion, making it suitable for demanding coatings.

3M™ Scotch-Weld™ Acrylic Adhesive DP820 is a two-part acrylic adhesive specially formulated to bond many plastics, metals and oily metals.When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.