Adhesive 胶黏剂

HumiSeal®
1A33 is a single component, polyurethane conformal coating, suitable for general printed circuit board
applications. HumiSeal®
1A33 contains no free isocyanates and fluoresces under UV light for inspection
purposes.

HumiSeal® 1A33 LTX is a single component, polyurethane conformal coating, suitable for general printed circuit
board applications. It is especially formulated with reduced xylene and toluene concentration to be fully compliant
with GB30981-2020*. HumiSeal® 1A33 LTX is also produced as pre-blended products, at a range of viscosities,
suitable for a variety of applications with no further dilution required. HumiSeal® 1A33 LTX, and its Pre-blend
Products, contain no free isocyanates and fluoresce under UV light for inspection purposes.

HumiSeal® 1A33LOS is a single component, polyurethane conformal coating, suitable for general printed circuit board
applications. HumiSeal® 1A33LOS is a development of HumiSeal® 1A33 with reduced odor levels and lower toxicity
solvents. After complete cure, the properties of HumiSeal® 1A33 LOS and HumiSeal® 1A33 are comparable.

HumiSeal®
1R32 is a fast drying, single component acrylic conformal coating that provides excellent moisture and
environmental protection for printed circuit assemblies. HumiSeal®
1R32 fluoresces under UV light for ease of
inspection and is easily repaired.

HumiSeal®
Acrylic Gel is a fast drying, single component, thixotropic acrylic paste that provides excellent moisture
and environmental protection for printed circuit assemblies. HumiSeal®
Acrylic Gel has been designed for use with
our acrylic conformal coatings. HumiSeal®
Acrylic Gel can be used for sealing, damming and to provide an extra
level of protection around component leads. HumiSeal®
Acrylic Gel fluoresces under UV light for ease of inspection
and is easily repaired.

HumiSeal®
1A20R is a single component, chemically resistant, fast curing polyurethane conformal coating.
HumiSeal®
1A20R fluoresces under UV light for ease of inspection

HumiSeal®
1A20 is a single component, chemically resistant, fast curing polyurethane conformal coating. HumiSeal®
1A20 fluoresces under UV light for ease of inspection.