Adhesive 胶黏剂

LOCTITE SI 5210, Silicone, Ultra-fast Curing, Non-Corrosive RTV, Potting
LOCTITE SI 5210 is an ultra fast curing, non-corrosive RTV silicone designed for potting, wire tacking, selective sealing, vibration dampening and repair/rework applications on PCBs. It is ideally suited for high-volume manufacturing and is particularly effective for automotive electronics applications or other harsh environments. The fast surface cure allows the material to be handled quickly after dispensing. The thixotropic nature of LOCTITE SI 5210 reduces the migration of liquid product after application to the substrate.

LOCTITE SI 596 is a red, 1-part, flowable smooth, acetoxy silicone paste sealant. It forms a tough, flexible, waterproof, oil-resistant silicone rubber bond. It is also used as a sealant and adhesive in industrial furnaces, ovens, boilers, exhaust stacks, high temperature ducting and heating elements in electrical appliances.

LOCTITE SI 598 is a metallic black, 1-part, thixotropic, room temperature vulcanizing oxime silicone paste sealant. It cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. It resists ageing, weathering and thermal cycling without hardening, shrinking or cracking. This product is typically used in applications with an operating range of -54 to +260°C.

LOCTITE SI 5970 is a silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. The product is designed primarily for flexible flange sealing. It is ideally used where high vibration or flexing occurs. It is tack-free after just 25 min. The product can be used on machined or cast surfaces, metal, plastic or painted parts.

LOCTITE SF 712 is a transparent, isopropanol amine solvent-based liquid cyanoacrylate activator used where increased cure speed of LOCTITE cyanoacrylate adhesives is required. It can be either pre- or post-applied to the bond. It is especially suited for post-application on cyanoacrylate adhesive to ensure rapid fixturing. Typical applications include securing wires or coils to PCBs.

LOCTITE SF 7200 removes cured chemical gaskets by softening the material on the flange. After application, the product forms a foam layer over the gasket, preventing the sealant from running out of the intended location. Therefore, it is possible to work within the required time period. Typical applications include removal of all chemical gaskets on metal flanges. Especially useful where scraping, such as aluminum or other soft metal flanges, could cause surface damage.

TEROSON RB R2000 HS is a rubber and resin-based, paintable underbody coating used to protect and complement existing vehicle chassis anti-corrosion coatings. It can also be used for localized chassis coating repairs. It enhances the abrasion resistance of visible areas of the vehicle chassis. The product can restore the texture of the original factory coating and is compatible with all OEM coatings. For best results, it is recommended to use with TEROSON ET UBC GUN or TEROSON ET UBC MULTI SPRAY GUN. TEROSON VR 10 is recommended for surface cleaning.

TEROSON SB 3120 is a rubber and resin-based automotive chassis spray coating used for localized repairs, such as treating small areas and repairing specific sections of accident-damaged vehicle chassis. This product is paintable and has good compatibility with automotive chassis PVC coatings. It serves as an effective supplement to the vehicle's PVC coating and provides protection for rubber and resin protective coatings.

LOCTITE MR 5972 is a gray, one-component, slow-drying adhesive sealant. Remains flexible and tough with an operating temperature range from -45°C to +315°C. Works on cork, paper, plastic and metal surfaces. Typical applications include gaskets, flanges, threaded connections, aircraft heating systems, manifolds, fittings, steam lines, gearboxes and covers.

LOCTITE SI 5900 is a low strength, moisture curing, silicone-containing thixotropic paste. Typical applications include molded sheet metal covers (timer covers and oil sumps). Fast tack-free time of 15 minutes, suitable for gaps below 1 mm. One-component, no mixing required