Adhesive 胶黏剂

HumiSeal®
1A27 is a single component, polyurethane conformal coating, suitable for general printed circuit
board applications. HumiSeal® 1A27 contains no free isocyanates.

HumiSeal® 1A27 LTX is a single component, polyurethane conformal coating, suitable for general printed circuit
board applications.

HumiSeal® 1A33 LOF is a single component, polyurethane conformal coating, suitable for general printed circuit
board applications. The formula of 1A33 LOF contains curing accelerants which significantly reduce curing times
compared with other polyurethane coatings. High levels of chemical resistance and physical hardness can be
achieved after 4 hours at 85˚C

free of solvents | thixotropic

free of solvents | dual-curing, unfilled

free of solvents | dual-curing, unfilled

free of solvents, free of antimony | low-temperature-curing from + 60 °C, heat curing mandatory,
light-fixable, filled, reproducible, low shrinkage, fast fixation, thixotropic

free of solvents, free of antimony | low-temperature-curing from + 60 °C, heat curing mandatory,
light-fixable, humidity-resistant, tension-equalizing, filled, reproducible, low shrinkage, fast fixation,
light-blocking, thixotropic

free of solvents, free of antimony | low-temperature-curing from + 60 °C, heat curing mandatory,
light-fixable, tension-equalizing, flow-resistant, filled, light-blocking, thixotropic

free of solvents, free of antimony | low-temperature-curing from + 60 °C, heat curing mandatory,
light-fixable, low-temperature-curing, flow-resistant, filled, fast fixation, light-blocking, thixotropic