3M

     3M 3797 Hot Melt Adhesive is a high-temperature resistant, low viscosity adhesive that is ideal for effective coverage and protection in small areas, making it particularly suitable for electrical potting. This fully solid thermoplastic adhesive even provides a 30-second open bonding time, making it suitable for deep groove potting as well. The use of the 3M™ PG II Hot Melt Applicator ensures better coating results and is highly suitable for high-volume operations. Hot melt adhesive for electrical potting 3M 3797 Hot Melt Adhesive is a 100% solid thermoplastic low-melting-point adhesive with low viscosity and high-temperature resistance, making it suitable for electrical potting adhesives and other coatings involving electrical and electronic components. It is particularly useful for coatings where protection and long-term stability are crucial. This hot melt adhesive is easy and smooth to flow into small areas, such as on printed circuit boards, after being dispensed, and it cures rapidly. The approximately 30-second open bonding time facilitates effective deep potting, and it enhances efficiency in high-volume operations.

3M™ 1357 Neoprene High Performance Contact Adhesive is a versatile solvent-based adhesive. It provides high immediate bond strength and good heat resistance, commonly used for bonding most metals and plastics. It is also suitable for large surface panels or laminates.

3M™ High Performance Industrial Plastic Adhesive 4693 dries quickly with an open bond time of approximately 20 minutes. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water and the sun. Additionally, it bonds well to plastics, providing long-term adhesion as well as good resistance to cleaning products.

3M™ Wind Blade Spray Adhesive is a high-strength, fast-drying adhesive specifically designed for bonding/fabricating fiberglass cloth, roving, and other reinforcement materials or auxiliary materials during the vacuum infusion process of wind turbine blades.

This high-strength, fast-drying adhesive utilizes a formulation based on synthetic rubber elastomers, suitable for bonding/fabricating fiberglass cloth, roving, and other reinforcement materials and auxiliary materials (such as flow media) during the infusion process.

3M™ Industrial Plastic Adhesive 4475 dries quickly and has an open bonding time of less than 10 minutes, depending on conditions. Its assembled bonds are proven to be strong. Additionally, it bonds well to plastics, providing long-term adhesion as well as good resistance to cleaning products.

3M™ Industrial Adhesive 4799 provides a reliable bond for EPDM and rubber applications. Resistant to heat and water, this industrial adhesive delivers the durability you need and can depend on for years to come.

3M High Performance Industrial Plastic Adhesive 4693H dries quickly with an open bonding time of approximately 20 minutes. It provides strong assembly bonding while also offering resistance to wind, rain, water, and sunlight. Additionally, the adhesive tape securely bonds plastics, has long-lasting adhesion, and exhibits good tolerance to cleaning agents.

3M™ Hot Melt Adhesive 3792LM is a transparent, multi-purpose adhesive that effectively bonds wood, lightweight metals, and certain plastics for furniture, decorations, and woodworking applications. The recommended application temperature range is 250-270°F (121-132°C).

Open bonding time allows for adjustment and positioning
The open time of 3M™ Hot Melt Adhesive 3792LM is 50 seconds, allowing for positioning and adjustment on wood, polypropylene, corrugated boxes, and lightweight substrates. Its near-instant bonding characteristics help shorten production time for POP assembly, bonding, fastening, fixing, repair, potting, panel bonding, wire tacking, bundling, sealing, encapsulation, stiffening, foam bonding, and packaging. Used in conjunction with 3M™ hot melt adhesive applicators. The recommended application temperature range is 250-270°F (121-132°C).

3M™ 3798 LM hot melt adhesive is a low-melt adhesive used to securely bond items in shrink packaging. This adhesive is easy to remove and suitable for adhering business cards, coupons, inserts, credit cards, brochures, and commonly used samples in mailings.

3M™ 3798 LM hot melt adhesive is specifically designed using a solid thermoplastic resin that becomes fluid when heated. This low-melt adhesive is applied at 120°F, a temperature low enough to bond to paper, most plastics, and various other substrates including most coated surfaces. The adhesive cools, hardens, and bonds within seconds, providing strength without the need for clamping. It allows for quick and repetitive application when needed, eliminating excessive processes to save time and effort.

3M™ Hot Melt Adhesive 3792 is a transparent, multi-purpose adhesive that effectively bonds wood, light metals, and some plastics in furniture, interior decoration, and woodworking applications.

The open bonding time allows for adjustment and positioning. With a 50-second open bonding time, 3M™ 3792 Hot Melt Adhesive enables positioning and adjustment on wood, polypropylene, corrugated boxes, and lightweight substrates. Its near-instant bonding characteristics help shorten production time for POP assembly, bonding, fastening, protection, repair, potting, panel bonding, wire tacking, bundling, sealing, encapsulation, stiffening, foam bonding, and packaging. Used in conjunction with 3M™ hot melt adhesive guns.